MES表面活性剂的工业化精制工艺

将α-磺基脂肪酸甲酯钠盐（MES）产品（含活性物质70%）在加热熔融的状态下滴加到50~55℃低沸点水溶性有机溶剂中，经冷却、结晶、过滤和干燥，得到高纯MES粉剂产品。考察了低沸点水溶性有机溶剂种类、原料与溶剂的投料质量比、冷却温度和结晶时间等工艺条件对产品回收率、活性物质量分数和过筛率的影响，得到了最佳纯化精制工艺：以甲醇为溶剂，5 kg MES，MES与溶剂的投料质量比为1：3，冷却温度为5℃，结晶时间为120 min，干燥时间60 min，干燥温度45℃，溶剂使用3次。本工艺条件下，所制得MES粉剂产品回收率大于98%，含活性物质量分数大于93.0%，产品在40℃密封保存12 h后，过0.850 mm筛孔的筛，过筛率达100%。     

木质素化学降解及其在聚合物材料中应用的研究进展

木质素是自然界储量丰富的可再生天然酚类高分子，可替代传统化石资源应用于聚合物材料合成。木质素分子结构中的大分子刚性骨架可赋予材料独特的力学性能和热稳定性。但木质素化学组成和分子结构复杂、反应活性低，限制了在聚合物材料领域的应用。化学降解是一种高效、高选择性且应用广泛的降解方法，经化学降解处理得到的木质素低聚物具有活性官能团多、反应活性高、溶解性好等优点，有利于拓展木质素在聚合物材料领域的高附加值应用。重点综述了近年来国内外有关木质素化学降解及其降解产物应用于聚合物材料的研究进展。     

苯并噁嗪树脂的合成及在形状记忆聚合物中的应用研究进展

苯并噁嗪树脂作为一类新型的热固性树脂，具有分子设计性强、阻燃性能和耐腐蚀性能优异、固化时不需要强酸、无小分子放出等优点，在航空、建筑、电子等领域获得了广泛应用。本文主要介绍了苯并噁嗪单体的合成方法（溶剂法、无溶剂法和悬浮法）、降低苯并噁嗪开环聚合温度的方法（合成具有特殊基团的苯并噁嗪单体、添加催化剂）及苯并噁嗪树脂在形状记忆聚合物中的应用（与其他聚合物混合，纯苯并噁嗪化学改性），对苯并噁嗪形状记忆聚合物目前存在的问题进行了概述并对苯并噁嗪形状记忆聚合物的发展前景做出了展望。     

化香果提取物体外抑菌活性研究

研究了化香果提取物对水产常见9种致病菌嗜水气单胞菌（Aeromonas hydrophila）、温和气单胞菌（Aeromonas sobria）、豚鼠气单胞菌（Aeromonas caviae）、维氏气单胞菌（Aeromonas veronii）、迟钝爱德华菌（Edwardsiella tarda）、副溶血弧菌（Vibrio parahaemolyticus）、鼠疫耶尔森氏菌（Yersinia pestis）、大肠杆菌（Escherichia coli）和金黄色葡萄球菌（Staphylococcus aureus）的抑菌活性。研究结果表明：化香果提取物对9种细菌均具有抑制作用，最小抑菌浓度为4.50 g/L。对每种细菌而言，抑菌效果随化香果提取物质量浓度的增加而增强，其中对大肠杆菌的抑制能力最强，IC₅₀值为0.035 g/L；金黄色葡萄球菌次之，IC₅₀值为0.053 g/L。对雌雄小鼠急性经口毒性试验结果表明化香果提取物对小鼠的急性经口半数致死量（LD₅₀值）分别为5 010和7 940 mg/kg体质量，表明化香果提取物属于实际无毒级。     

Improvement in flame retardancy of polyurethane dispersions by newer reactive flame retardant

A novel phosphorus containing reactive flame retardant was synthesized and incorporated successfully in polyurethane backbone to obtain flame retardant aqueous polyurethane dispersions (FRPUDs). The reactive flame retardant compound was synthesized by using phosphorus oxychloride (1 mole) and N-methylaminoethanol (3 mole). The structure of synthesized phosphorus containing triol was confirmed by FTIR, ¹H NMR and ³¹P NMR spectrometry. Further, polyurethane prepolymer was modified with phosphorus containing triol compound in various amounts (30, 40 and 50% on equivalent basis) and FRPUDs were prepared. PUD films were applied on wood and mild steel panels and air dried. It was then characterized for mechanical, chemical, thermal and flame retardant properties. It was observed that all FRPUDs exhibited good mechanical properties and improved flame retardancy as compared to the conventional one. The maximum limiting oxygen index (LOI) value of 37 was obtained for FRPUD containing 0.8 mass% of phosphorus and 1 mass% of nitrogen. The flame retardancy was greatly depending on the phosphorus content and increased with increase in phosphorus content.     

Preparation and polymerization of isopimaric acid derivatives

Isopimaric acid is a typical rosin compound and can account for 30% of the total mass of slash pine rosin. The molecular structure of isopimaric acid derivatives features an unsaturated double bond at the C13 position, opening up the possibility of their industrial polymerization. In this study, isopimaric acid (95.4%), methyl isopimarate (99.5%), and allyl isopimarate (95.1%) were prepared as highly pure monomers. New experimental results are presented and mechanisms based on the investigation of free-radical polymerization under UV irradiation are proposed. New rosin monomers for potential value-added utilization of woody biomass are also identified. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47817.     

Non-isocyanate polyurethane (NIPU) from tris-2-hydroxy ethyl isocyanurate modified fatty acid for coating applications

Conventional polyurethanes, in spite of their excellent properties and wide applications possess safety and handling issues related to isocyanate compounds while synthesis. The cyclic carbonate-amine reaction resulting into hydroxyurethane is said to be an isocyanate free polyurethane system and novel route of synthesis as well as good alternative to conventional polyurethanes. In the present work, non-isocyanate polyurethane was synthesized by modification of dehydrated castor oil fatty acid (DCOFA) with tris-2-hydroxy-ethyl isocyanurate (THEIC). The synthesis involved three steps viz esterification of DCOFA with THEIC, epoxidation of the ester formed (TEFA) and subsequent cyclocarbonation of THEIC–ester of fatty acid (CTEFA). The products obtained were confirmed by Fourier Transform Infrared Spectroscopy (FTIR) as well as ¹H and ¹³C Nuclear Magnetic Spectroscopy (NMR). The CTEFA was cured with various amines such as dimethyl diphenyl sulphone (DDS), Isophorone Diamine (IPDA) and hexamethylene diamine (HMDA) to obtain NIPU coatings. The cured coatings were studied for chemical, mechanical, thermal and electrochemical properties. Also, the effect of amine curing agents on the performance of NIPU coatings was investigated. Experimental results showed that incorporation of THEIC into the system significantly improved coating properties.     

环氧树脂基双组分水性聚氨酯的制备及其在木器涂料中的应用

为提高双组分水性聚氨酯的室温交联速度，将 N-苄基乙醇胺引入到环氧树脂制备了环氧树脂基水性多元醇，表征了多元醇的化学结构，并测定了其相对分子质量、粒径分布和玻璃化温度等主要技术参数。将环氧树脂基水性多元醇与多异氰酸酯配合制备了双组分水性聚氨酯，采用红外光谱法研究了室温交联反应过程。研究结果表明：多元醇分子结构中引入苄胺基加快了双组分水性聚氨酯的交联反应速度。将双组分水性聚氨酯制备成水性木器涂料，漆膜具有优异的耐冲击性、附着力、柔韧性、光泽、耐液体介质、硬度、丰满度等性能。     

Effect of structure on the properties of polyurethanes based on aromatic cardanol-based polyols prepared by thiol-ene coupling

Industrial-grade cardanol and 2-mercaptoethanol were reacted to generate hydroxyl-functionalized cardanol by UV, free-radical-initiated thiol-ene coupling between the double bond moieties of the cardanol long carbon side chain and thiol functional groups. The average hydroxyl number of the hydroxyl-functionalized cardanol was controlled by reaction time, with the hydroxyl values of this ranging within 168–201 mg KOH g⁻¹. This cardanol was then used as a polyol to prepare cardanol-based polyurethane with hexamethylene diisocyanate and a NCO/OH ratio of 1. To compare the effect of cardanol-based polyols with the properties of cardanol-based polyurethane, cardanol modified with 10-undecylenate was used as a raw material to prepare cardanol-based polyols, including the long carbon chain of 10-undecylenate. All properties were examined, and data revealed that cardanol-based polyols including this long carbon chain can improve the hydrophobic and mechanic properties of the cardanol-based polyurethane.